Isolation valve kit · MIZUDO

MIZUDO FSSVKB-1 Tankless Isolation Valve Kit

Isolation valve kit

Isolation valve kitFits most 3/4" MNPT tankless water heaters0.75 in

Updated October 2026

The short answer

A sensible isolation valve kit for new tankless installs.

Delivers
Isolation valve kit.
Watch for
Check the connection size first.
Suits
New tankless installs.
Connections
0.75 in
Material
Brass
Dimensions (seller)
3 x 3 x 3 inches
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

What it delivers

The MIZUDO FSSVKB-1 Tankless Isolation Valve Kit is a pair of tankless service valves for flushing and isolating the heater; its listing says it fits most 3/4" MNPT tankless water heaters (electric & gas).

With isolation valves on both lines, descaling is a hose-on, hose-off job; the hot-side valve usually carries the relief valve port.

Match the connection type (threaded IPS, sweat or push-fit) and size, usually 3/4 inch, to the heater and the pipe; most kits put the relief valve port on the hot side.

Other listed details: connections: 0.75 in; material: Brass; model: FSSVKB-1; fits: most 3/4" MNPT tankless water heaters (electric & gas).

The listing gives dimensions of 3 x 3 x 3 inches and pressure relief valve and 3/4" npt hot & cold water supply isolator valves in the box.

Right unit for this house?

Install it when

  • New tankless installs
  • Owners who flush their own heater

Look at another unit when

  • Heaters whose manual calls for a different method

Strengths and trade-offs

Strengths

  • Isolation valve kit
  • Names most 3/4" MNPT tankless water heaters (e

Trade-offs

  • Check the connection size first

Install limits

  • Figures are the maker's or seller's own. Flow at a rise is our estimate from the input; gas, venting and electrical work needs a licensed professional.

Rated performance

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Model numberFSSVKB-1Retailer
MaterialBrassRetailer
Dimensions (seller)3 x 3 x 3 inchesRetailer
Connections0.75 inRetailer
Fitsmost 3/4" MNPT tankless water heaters (electric & gas)Retailer

Rival units at this flow

More descaling and maintenance kits rated for similar demand

Full descaling and maintenance kits spec grid · Every MIZUDO unit in the catalog

Final verdict

A sensible isolation valve kit for new tankless installs.

Buy this unit

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

What pipe does the MIZUDO FSSVKB-1 Tankless Isolation Valve Kit connect to?
See the connection type and size on the listing (0.75 in); match it to the heater's fittings and your pipe before ordering.