Non-condensing gas tankless · GASLAND

GASLAND E 199 199,000 BTU Natural Gas Tankless Water Heater

199,000 BTU/h non-condensing gas tankless, about 6.8 GPM at a 45°F rise

7.6 GPM max199,000 BTU/h~4.4 GPM at 70°F riseNatural gas

Updated October 2026

The short answer

A sensible non-condensing gas tankless for houses running 2 showers at once in winter.

Delivers
199,000 BTU/h input.
Watch for
Gas line may need upsizing.
Suits
Houses running 2 showers at once in winter.
Max flow (maker)
7.6
Input (maker)
199,000 BTU/h
Fuel
Natural Gas
UEF (maker)
0.8
Dimensions (seller)
16.7"W x 11.6"H
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

What it delivers

The GASLAND E 199 199,000 BTU Natural Gas Tankless Water Heater is a non-condensing gas tankless with a 199,000 BTU/h burner and a stated maximum flow of 7.6 GPM. Its listing gives a UEF of 0.8.

Worked out from its input, it delivers roughly 6.8 GPM when the water only has to rise 45°F, and 4.4 GPM at a 70°F winter rise: 3 showers at 2 GPM in summer, 2 showers at 2 GPM in winter. Size it to your fixtures and climate.

Gas load at full fire: about 192 cubic feet of natural gas an hour. An older half-inch line that already feeds a furnace often can't spare that, so have a gas fitter check the pipe size and run.

Non-condensing indoor units run hot exhaust and vent in the maker's listed vent system (often stainless Category III), which costs more than plastic.

Other listed details: model: E 199.

The listing gives dimensions of 16.7 in (W) x 11.6 in (H).

Right unit for this house?

Install it when

  • Houses running 2 showers at once in winter
  • Replacing a gas tank heater

Look at another unit when

  • More than 2 winter showers at once
  • Homes without a gas line

Strengths and trade-offs

Strengths

  • 199,000 BTU/h input
  • Up to 7.6 GPM
  • UEF 0.8

Trade-offs

  • Gas line may need upsizing
  • Stainless venting costs more
  • Scale builds up without flushing

Install limits

  • Figures are the maker's or seller's own. Flow at a rise is our estimate from the input; gas, venting and electrical work needs a licensed professional.

Rated performance

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Model numberE 199Retailer
Dimensions (seller)16.7"W x 11.6"HRetailer
Input (maker)199,000 BTU/hRetailer
Max flow (maker)7.6Retailer
UEF (maker)0.8Retailer
FuelNatural GasRetailer

Rival units at this flow

More gas tankless water heaters rated for similar demand

Full gas tankless water heaters spec grid · Every GASLAND unit in the catalog

Final verdict

A sensible non-condensing gas tankless for houses running 2 showers at once in winter.

Buy this unit

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

What flow does the GASLAND E 199 199,000 BTU Natural Gas Tankless Water Heater give in winter?
From its 199,000 BTU/h input we estimate about 6.8 GPM at a 45°F rise and 4.4 GPM at a 70°F rise, so 3 two-GPM showers with mild inlet water and 2 in a cold winter. The maker's flow chart for this model is the final word.
What size gas line does the GASLAND E 199 199,000 BTU Natural Gas Tankless Water Heater need?
At full fire it uses about 192 cubic feet of natural gas an hour. The pipe size depends on the length of the run and every other gas appliance on it; the maker's manual and a licensed gas fitter decide it.