Propane tankless · Rinnai

Rinnai RE160iP Propane Tankless Water Heater

160,000 BTU/h propane tankless, about 5.5 GPM at a 45°F rise

6.1 GPM max160,000 BTU/h~3.5 GPM at 70°F risePropane

Updated October 2026

The short answer

A practical propane tankless for one shower at a time in cold climates.

Delivers
160,000 BTU/h input.
Watch for
Gas pipe sizing to confirm.
Suits
One shower at a time in cold climates.
Max flow (maker)
6.1 GPM
Input (maker)
160,000 BTU/h
Voltage
120 V
Fuel
Propane
Condensing
non-condensing
Connectivity
WiFi
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

What it delivers

The Rinnai RE160iP Propane Tankless Water Heater is a propane tankless with a 160,000 BTU/h burner and a stated maximum flow of 6.1 GPM.

Flow depends on how cold the incoming water is. Our estimate from its input: 5.5 GPM at a 45°F rise, falling to 3.5 GPM at 70°F, which is 1 shower at 2 GPM on a cold-climate winter day. Run your house through the planner.

At full fire it burns about 1.7 gallons of propane an hour. The gas line has to carry that on top of the furnace, range and dryer; a gas fitter sizes the pipe from its length and the total load.

Non-condensing indoor units run hot exhaust and vent in the maker's listed vent system (often stainless Category III), which costs more than plastic.

Also on the listing: features: LED Display; connectivity: WiFi; material: Stainless Steel; model: RE160iP; warranty: 1 Year Labor, 5 Year Parts.

The listing gives dimensions of 14.05 in (W) x 27.34 in (H) and a weight of 48.5 lb.

Warranty, per the listing: 1 Year Labor, 5 Year Parts.

Right unit for this house?

Install it when

  • One shower at a time in cold climates
  • Propane homes
  • Replacing a gas tank heater

Look at another unit when

  • More than 1 winter shower at once
  • Homes without a gas line

Strengths and trade-offs

Strengths

  • 160,000 BTU/h input
  • Up to 6.1 GPM

Trade-offs

  • Gas pipe sizing to confirm
  • Stainless venting costs more
  • Scale builds up without flushing

Install limits

  • Figures are the maker's or seller's own. Flow at a rise is our estimate from the input; gas, venting and electrical work needs a licensed professional.

Rated performance

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Model numberRE160iPRetailer
Dimensions (seller)14.05"W x 27.34"HRetailer
Features (seller)LED DisplayRetailer
Voltage120 VRetailer
Max flow (maker)6.1 GPMRetailer
Input (maker)160,000 BTU/hRetailer
Product weight48.5 lbRetailer
MaterialStainless SteelRetailer
Warranty1 Year Labor, 5 Year PartsRetailer
FuelPropaneRetailer
Condensingnon-condensingRetailer
ConnectivityWiFiRetailer

Rival units at this flow

More gas tankless water heaters rated for similar demand

Full gas tankless water heaters spec grid · Every Rinnai unit in the catalog

Final verdict

A practical propane tankless for one shower at a time in cold climates.

Buy this unit

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

Is the Rinnai RE160iP Propane Tankless Water Heater big enough for two showers?
From its 160,000 BTU/h input we estimate about 5.5 GPM at a 45°F rise and 3.5 GPM at a 70°F rise, so 2 two-GPM showers with mild inlet water and 1 in a cold winter. The maker's flow chart for this model is the final word.
What size gas line does the Rinnai RE160iP Propane Tankless Water Heater need?
At full fire it uses about 154 cubic feet of natural gas an hour or 1.7 gallons of propane. The pipe size depends on the length of the run and every other gas appliance on it; the maker's manual and a licensed gas fitter decide it.