Point-of-use electric tankless · Camplux

Camplux TE05 4.5 kW Point-of-Use Tankless Water Heater

4.5 kW point-of-use electric tankless, about 38 A at 120 V

4.5 kW120 V~38 A40A Circuit Breaker1.0 GPM max~0.4 GPM at 70°F rise

Updated October 2026

The short answer

A sensible point-of-use electric tankless for one sink or a low-flow shower.

Delivers
4.5 kW.
Watch for
Flow drops with cold inlet water.
Suits
One sink or a low-flow shower.
Max flow (maker)
1 GPM
Power
4.5 kW
Voltage
120 V
Breakers (maker)
40A Circuit Breaker
Connections
1/2"npt
Material
Aluminum
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

What it delivers

The Camplux TE05 4.5 kW Point-of-Use Tankless Water Heater is a point-of-use electric tankless rated at 4.5 kW on 120 volts. Its listing gives a maximum flow of 1.0 GPM.

Worked out from its input, it delivers roughly 0.7 GPM when the water only has to rise 45°F, and 0.4 GPM at a 70°F winter rise: less than one 2 GPM shower in summer, less than one 2 GPM shower in winter. Check your house in the planner.

At 120 volts 4.5 kW is about 38 amps. The maker calls for 40A Circuit Breaker. The requirement calculator shows it at 208 V too; an electrician confirms the panel.

Small units like this suit one sink or a low-flow shower close by; at a kitchen sink's 1.5 GPM the water won't rise as far.

Other listed details: features: Dry Combustion Protection, LED Display, Lightweight, Self-Modulating; connections: 1/2"npt; material: Aluminum; model: TE05.

The listing gives dimensions of 7.4 in (W) x 10.94 in (H) and a weight of 4.5 lb.

Right unit for this house?

Install it when

  • One sink or a low-flow shower
  • A far bathroom with a long wait for hot water

Look at another unit when

  • Whole-house hot water
  • Kitchen sinks at full flow in cold climates

Strengths and trade-offs

Strengths

  • 4.5 kW
  • Up to 1.0 GPM
  • No venting or gas line
  • Breakers stated by the maker

Trade-offs

  • Flow drops with cold inlet water

Install limits

  • Figures are the maker's or seller's own. Flow at a rise is our estimate from the input; gas, venting and electrical work needs a licensed professional.

Rated performance

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Model numberTE05Retailer
Dimensions (seller)7.4"W x 10.94"HRetailer
Features (seller)Dry Combustion Protection, LED Display, Lightweight, Self-ModulatingRetailer
Power4.5 kWRetailer
Voltage120 VRetailer
Max flow (maker)1 GPMRetailer
Product weight4.5 lbRetailer
MaterialAluminumRetailer
Breakers (maker)40A Circuit BreakerRetailer
Connections1/2"nptRetailer

Rival units at this flow

More point-of-use water heaters rated for similar demand

Full point-of-use water heaters spec grid · Every Camplux unit in the catalog

Final verdict

A sensible point-of-use electric tankless for one sink or a low-flow shower.

Buy this unit

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

What breakers does the Camplux TE05 4.5 kW Point-of-Use Tankless Water Heater need?
About 38 amps at 120 volts (4.5 kW ÷ 120 V). The maker calls for 40A Circuit Breaker. Panel capacity, breakers and wire are confirmed by a licensed electrician from the manual.
How much hot water does the Camplux TE05 4.5 kW Point-of-Use Tankless Water Heater deliver in winter?
About 0.4 GPM at a 70°F rise and 0.7 GPM at a 45°F rise, estimated from its power and capped at its stated maximum.