Point-of-use electric tankless · Daordaer

Daordaer LF-001A 3 kW Point-of-Use Tankless Water Heater

3 kW point-of-use electric tankless, about 27 A at 110 V

3 kW110 V~27 A1.6 GPM max~0.3 GPM at 70°F rise

Updated October 2026

The short answer

A practical point-of-use electric tankless for one sink or a low-flow shower.

Delivers
3 kW.
Watch for
Flow drops with cold inlet water.
Suits
One sink or a low-flow shower.
Max flow (maker)
1.6 GPM
Power
3 kW
Voltage
110 V AC
Material
Acrylonitrile Butadiene Styrene
Dimensions (seller)
4.3"W x 14.5"H
Product weight
4 lb
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

What it delivers

The Daordaer LF-001A 3 kW Point-of-Use Tankless Water Heater is a point-of-use electric tankless rated at 3 kW on 110 volts. Its listing gives a maximum flow of 1.6 GPM.

Flow depends on how cold the incoming water is. Our estimate from its input: 0.5 GPM at a 45°F rise, falling to 0.3 GPM at 70°F, which is less than one 2 GPM shower on a cold-climate winter day. Try your own inlet temperature.

At 110 volts 3 kW is about 27 amps. Whether your panel can carry it alongside heating and cooking loads is an electrician's call.

Point-of-use units go under or beside one sink, where a short pipe run means hot water in seconds.

Also on the listing: features: Dry Combustion Protection, LED Display, Lightweight, Temperature Lock; material: Acrylonitrile Butadiene Styrene; model: LF-001A.

The listing gives dimensions of 4.3 in (W) x 14.5 in (H), a weight of 4 lb and comes as a combo set in the box.

Right unit for this house?

Install it when

  • One sink or a low-flow shower
  • A far bathroom with a long wait for hot water

Look at another unit when

  • Whole-house hot water
  • Kitchen sinks at full flow in cold climates

Strengths and trade-offs

Strengths

  • 3 kW
  • Up to 1.6 GPM
  • No venting or gas line

Trade-offs

  • Flow drops with cold inlet water
  • Breaker needs not stated

Install limits

  • Figures are the maker's or seller's own. Flow at a rise is our estimate from the input; gas, venting and electrical work needs a licensed professional.

Rated performance

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Model numberLF-001ARetailer
Dimensions (seller)4.3"W x 14.5"HRetailer
Features (seller)Dry Combustion Protection, LED Display, Lightweight, Temperature LockRetailer
Power3 kWRetailer
Voltage110 V ACRetailer
Max flow (maker)1.6 GPMRetailer
Product weight4 lbRetailer
MaterialAcrylonitrile Butadiene StyreneRetailer

Rival units at this flow

More point-of-use water heaters rated for similar demand

Full point-of-use water heaters spec grid

Final verdict

A practical point-of-use electric tankless for one sink or a low-flow shower.

Buy this unit

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

What breakers does the Daordaer LF-001A 3 kW Point-of-Use Tankless Water Heater need?
About 27 amps at 110 volts (3 kW ÷ 110 V). Panel capacity, breakers and wire are confirmed by a licensed electrician from the manual.
How much hot water does the Daordaer LF-001A 3 kW Point-of-Use Tankless Water Heater deliver in winter?
About 0.3 GPM at a 70°F rise and 0.5 GPM at a 45°F rise, estimated from its power and capped at its stated maximum.