Point-of-use electric tankless · ThermoMate

ThermoMate ET080 8 kW Point-of-Use Tankless Water Heater

8 kW point-of-use electric tankless, about 33 A at 240 V

8 kW240 V~33 ADouble Pole 40Amp breaker~0.8 GPM at 70°F rise

Updated October 2026

The short answer

A well-specified point-of-use electric tankless for one sink or a low-flow shower.

Delivers
8 kW.
Watch for
Flow drops with cold inlet water.
Suits
One sink or a low-flow shower.
Power
8 kW
Voltage
240 V
Breakers (maker)
Double Pole 40Amp breaker
Tank
1.56 gal
Material
Steel
Dimensions (seller)
8.58"W x 12.2"H
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

What it delivers

The ThermoMate ET080 8 kW Point-of-Use Tankless Water Heater is a point-of-use electric tankless rated at 8 kW on 240 volts.

Expect about 0.8 GPM with cold winter water (a 70°F rise) and 1.2 GPM when the inlet is milder (45°F rise); that is less than one 2 GPM shower in January. Size it to your fixtures.

At 240 volts 8 kW is about 33 amps. The maker calls for Double Pole 40Amp breaker. Whether your panel can carry it alongside heating and cooking loads is an electrician's call.

Small units like this suit one sink or a low-flow shower close by; at a kitchen sink's 1.5 GPM the water won't rise as far.

Listed details: material: Steel; model: ET080.

The listing gives dimensions of 8.58 in (W) x 12.2 in (H) and a weight of 9.9 lb.

Right unit for this house?

Install it when

  • One sink or a low-flow shower
  • A far bathroom with a long wait for hot water

Look at another unit when

  • Whole-house hot water
  • Kitchen sinks at full flow in cold climates

Strengths and trade-offs

Strengths

  • 8 kW
  • No venting or gas line
  • Breakers stated by the maker

Trade-offs

  • Flow drops with cold inlet water

Install limits

  • Figures are the maker's or seller's own. Flow at a rise is our estimate from the input; gas, venting and electrical work needs a licensed professional.

Rated performance

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Model numberET080Retailer
Tank1.56 galRetailer
Dimensions (seller)8.58"W x 12.2"HRetailer
Features (seller)Leak proof heating chamber, Overheat Protection, Self-modulating auto adjust powerRetailer
Power8 kWRetailer
Voltage240 VRetailer
Product weight9.9 lbRetailer
MaterialSteelRetailer
Breakers (maker)Double Pole 40Amp breakerRetailer

Rival units at this flow

More point-of-use water heaters rated for similar demand

Full point-of-use water heaters spec grid · Every ThermoMate unit in the catalog

Final verdict

A well-specified point-of-use electric tankless for one sink or a low-flow shower.

Buy this unit

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

How many amps does the ThermoMate ET080 8 kW Point-of-Use Tankless Water Heater draw?
About 33 amps at 240 volts (8 kW ÷ 240 V). The maker calls for Double Pole 40Amp breaker. Panel capacity, breakers and wire are confirmed by a licensed electrician from the manual.
How much hot water does the ThermoMate ET080 8 kW Point-of-Use Tankless Water Heater deliver in winter?
About 0.8 GPM at a 70°F rise and 1.2 GPM at a 45°F rise, estimated from its power and capped at its stated maximum.