Non-condensing gas tankless · APUS

APUS AP-AWH-Q10NG 80,000 BTU Natural Gas Tankless Water Heater

80,000 BTU/h non-condensing gas tankless, about 2.7 GPM at a 45°F rise

3.6 GPM max80,000 BTU/h~1.8 GPM at 70°F riseNatural gas

Updated October 2026

The short answer

A solid non-condensing gas tankless for one shower at a time in cold climates.

Delivers
80,000 BTU/h input.
Watch for
Gas line may need upsizing.
Suits
One shower at a time in cold climates.
Max flow (maker)
3.6 GPM
Input (maker)
80,000 BTU/h
Voltage
120 V
Fuel
natural gas
UEF (maker)
0.81
Material
80,000 BTU,3.6 GPM
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

What it delivers

The APUS AP-AWH-Q10NG 80,000 BTU Natural Gas Tankless Water Heater is a non-condensing gas tankless with a 80,000 BTU/h burner and a stated maximum flow of 3.6 GPM. Its listing gives a UEF of 0.81.

At a 45°F rise (mild inlet water to a 120°F set point) it holds about 2.7 GPM, 1 shower at 2 GPM; in winter, at a 70°F rise, about 1.8 GPM, less than one 2 GPM shower. Run your house through the planner.

At full fire it burns about 77 cubic feet of natural gas an hour. The gas line has to carry that on top of the furnace, range and dryer; a gas fitter sizes the pipe from its length and the total load.

Its exhaust runs hot, so the vent must be the material its manual lists, usually stainless; budget for the vent kit.

From the listing: material: 80,000 BTU,3.6 GPM; model: AP-AWH-Q10NG; warranty: 2 Year Manufacturer Warranty.

The listing gives dimensions of 19.29 in (W) x 27.59 in (H) and a weight of 19.2 lb.

Warranty, per the listing: 2 Year Manufacturer Warranty.

Right unit for this house?

Install it when

  • One shower at a time in cold climates
  • Replacing a gas tank heater

Look at another unit when

  • More than 1 winter shower at once
  • Homes without a gas line

Strengths and trade-offs

Strengths

  • 80,000 BTU/h input
  • Up to 3.6 GPM
  • UEF 0.81

Trade-offs

  • Gas line may need upsizing
  • Stainless venting costs more
  • Scale builds up without flushing

Install limits

  • Figures are the maker's or seller's own. Flow at a rise is our estimate from the input; gas, venting and electrical work needs a licensed professional.

Rated performance

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Model numberAP-AWH-Q10NGRetailer
Dimensions (seller)19.29"W x 27.59"HRetailer
Features (seller)24/7 Customer Service, Anti-Freezing Protection, Easy Installation, LED Display, Low Water Flow Protection 24/7 Customer Service, Anti-Freezing Protection, Easy Installation, LED Display, Low Water Flow ProtectionRetailer
Voltage120 VRetailer
Max flow (maker)3.6 GPMRetailer
Input (maker)80,000 BTU/hRetailer
Product weight19.2 lbRetailer
Warranty2 Year Manufacturer WarrantyRetailer
Material80,000 BTU,3.6 GPMRetailer
UEF (maker)0.81Retailer
Fuelnatural gasRetailer

Rival units at this flow

More gas tankless water heaters rated for similar demand

Full gas tankless water heaters spec grid · Every APUS unit in the catalog

Final verdict

A solid non-condensing gas tankless for one shower at a time in cold climates.

Buy this unit

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

Is the APUS AP-AWH-Q10NG 80,000 BTU Natural Gas Tankless Water Heater big enough for two showers?
From its 80,000 BTU/h input we estimate about 2.7 GPM at a 45°F rise and 1.8 GPM at a 70°F rise, so 1 two-GPM shower with mild inlet water and 0 in a cold winter. The maker's flow chart for this model is the final word.
What size gas line does the APUS AP-AWH-Q10NG 80,000 BTU Natural Gas Tankless Water Heater need?
At full fire it uses about 77 cubic feet of natural gas an hour. The pipe size depends on the length of the run and every other gas appliance on it; the maker's manual and a licensed gas fitter decide it.