Non-condensing gas tankless · forimo

forimo CT1314-HWRSQ Tankless Water Heater

81,888 BTU/h non-condensing gas tankless, about 2.8 GPM at a 45°F rise

81,888 BTU/h~1.8 GPM at 70°F riseNatural gas

Updated October 2026

The short answer

A sensible non-condensing gas tankless for one shower at a time in cold climates.

Delivers
81,888 BTU/h input.
Watch for
Gas line may need upsizing.
Suits
One shower at a time in cold climates.
Input (maker)
81,888 BTU/h
Fuel
Natural Gas
Connections
1/2" npt
Material
Copper, Stainless Steel
Dimensions (seller)
13.8"W x 21.7"H
Product weight
23.2 lb
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

What it delivers

The forimo CT1314-HWRSQ Tankless Water Heater is a non-condensing gas tankless with a 81,888 BTU/h burner.

Worked out from its input, it delivers roughly 2.8 GPM when the water only has to rise 45°F, and 1.8 GPM at a 70°F winter rise: 1 shower at 2 GPM in summer, less than one 2 GPM shower in winter. Check it against your own fixtures.

Gas load at full fire: about 79 cubic feet of natural gas an hour. An older half-inch line that already feeds a furnace often can't spare that, so have a gas fitter check the pipe size and run.

Non-condensing indoor units run hot exhaust and vent in the maker's listed vent system (often stainless Category III), which costs more than plastic.

Other listed details: connections: 1/2" npt; material: Copper, Stainless Steel; model: CT1314-HWRSQ.

The listing gives dimensions of 13.8 in (W) x 21.7 in (H) and a weight of 23.2 lb.

Right unit for this house?

Install it when

  • One shower at a time in cold climates
  • Replacing a gas tank heater

Look at another unit when

  • More than 1 winter shower at once
  • Homes without a gas line

Strengths and trade-offs

Strengths

  • 81,888 BTU/h input

Trade-offs

  • Gas line may need upsizing
  • Stainless venting costs more
  • Annual flushing on hard water

Install limits

  • Figures are the maker's or seller's own. Flow at a rise is our estimate from the input; gas, venting and electrical work needs a licensed professional.

Rated performance

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Model numberCT1314-HWRSQRetailer
Dimensions (seller)13.8"W x 21.7"HRetailer
Features (seller)Anti-Freezing Protection, Flame Failure Protection, Overheat ProtectionRetailer
Input (maker)81,888 BTU/hRetailer
Product weight23.2 lbRetailer
MaterialCopper, Stainless SteelRetailer
FuelNatural GasRetailer
Connections1/2" nptRetailer

Rival units at this flow

More gas tankless water heaters rated for similar demand

Full gas tankless water heaters spec grid

Final verdict

A sensible non-condensing gas tankless for one shower at a time in cold climates.

Buy this unit

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

What flow does the forimo CT1314-HWRSQ Tankless Water Heater give in winter?
From its 81,888 BTU/h input we estimate about 2.8 GPM at a 45°F rise and 1.8 GPM at a 70°F rise, so 1 two-GPM shower with mild inlet water and 0 in a cold winter. The maker's flow chart for this model is the final word.
What size gas line does the forimo CT1314-HWRSQ Tankless Water Heater need?
At full fire it uses about 79 cubic feet of natural gas an hour. The pipe size depends on the length of the run and every other gas appliance on it; the maker's manual and a licensed gas fitter decide it.