Non-condensing gas tankless · VancEpic

VancEpic V-RH19K-NG 190,000 BTU Natural Gas Tankless Water Heater

190,000 BTU/h non-condensing gas tankless, about 6.5 GPM at a 45°F rise

8.5 GPM max190,000 BTU/h~4.2 GPM at 70°F riseNatural gas

Updated October 2026

The short answer

A solid non-condensing gas tankless for houses running 2 showers at once in winter.

Delivers
190,000 BTU/h input.
Watch for
Gas line may need upsizing.
Suits
Houses running 2 showers at once in winter.
Max flow (maker)
8.5 GPM
Input (maker)
190,000 BTU/h
Voltage
120 V
Fuel
Natural Gas
Connections
3/4" npt
Material
8.5GPM 190,000 BTU (Indoor)
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

What it delivers

The VancEpic V-RH19K-NG 190,000 BTU Natural Gas Tankless Water Heater is a non-condensing gas tankless with a 190,000 BTU/h burner and a stated maximum flow of 8.5 GPM.

At a 45°F rise (mild inlet water to a 120°F set point) it holds about 6.5 GPM, 3 showers at 2 GPM; in winter, at a 70°F rise, about 4.2 GPM, 2 showers at 2 GPM. Check it against your own fixtures.

At full fire it burns about 183 cubic feet of natural gas an hour. The gas line has to carry that on top of the furnace, range and dryer; a gas fitter sizes the pipe from its length and the total load.

Its exhaust runs hot, so the vent must be the material its manual lists, usually stainless; budget for the vent kit.

From the listing: features: LED Display; connections: 3/4" npt; material: 8.5GPM 190,000 BTU (Indoor); model: V-RH19K-NG; warranty: 2 Year Manufacturer.

The listing gives dimensions of 15.08 in (W) x 24.25 in (H).

Warranty, per the listing: 2 Year Manufacturer.

Right unit for this house?

Install it when

  • Houses running 2 showers at once in winter
  • Replacing a gas tank heater

Look at another unit when

  • More than 2 winter showers at once
  • Homes without a gas line

Strengths and trade-offs

Strengths

  • 190,000 BTU/h input
  • Up to 8.5 GPM

Trade-offs

  • Gas line may need upsizing
  • Stainless venting costs more
  • Needs periodic descaling

Install limits

  • Figures are the maker's or seller's own. Flow at a rise is our estimate from the input; gas, venting and electrical work needs a licensed professional.

Rated performance

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Model numberV-RH19K-NGRetailer
Dimensions (seller)15.08"W x 24.25"HRetailer
Features (seller)LED DisplayRetailer
Voltage120 VRetailer
Max flow (maker)8.5 GPMRetailer
Input (maker)190,000 BTU/hRetailer
Warranty2 Year ManufacturerRetailer
Material8.5GPM 190,000 BTU (Indoor)Retailer
FuelNatural GasRetailer
Connections3/4" nptRetailer

Rival units at this flow

More gas tankless water heaters rated for similar demand

Full gas tankless water heaters spec grid · Every VancEpic unit in the catalog

Final verdict

A solid non-condensing gas tankless for houses running 2 showers at once in winter.

Buy this unit

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

Is the VancEpic V-RH19K-NG 190,000 BTU Natural Gas Tankless Water Heater big enough for two showers?
From its 190,000 BTU/h input we estimate about 6.5 GPM at a 45°F rise and 4.2 GPM at a 70°F rise, so 3 two-GPM showers with mild inlet water and 2 in a cold winter. The maker's flow chart for this model is the final word.
What size gas line does the VancEpic V-RH19K-NG 190,000 BTU Natural Gas Tankless Water Heater need?
At full fire it uses about 183 cubic feet of natural gas an hour. The pipe size depends on the length of the run and every other gas appliance on it; the maker's manual and a licensed gas fitter decide it.