Point-of-use electric tankless · WINTEMP

WINTEMP WN08 8 kW Point-of-Use Tankless Water Heater

8 kW point-of-use electric tankless, about 33 A at 240 V

8 kW240 V~33 A1 x 40 Amp DP breakers1.9 GPM max~0.8 GPM at 70°F rise

Updated October 2026

The short answer

A practical point-of-use electric tankless for one sink or a low-flow shower.

Delivers
8 kW.
Watch for
Winter flow is much lower.
Suits
One sink or a low-flow shower.
Max flow (maker)
1.9 GPM
Power
8 Microwatts
Voltage
240 V
Amps (maker)
33 A
Breakers (maker)
1 x 40 Amp DP breakers
Tank
1.9 gal
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

What it delivers

The WINTEMP WN08 8 kW Point-of-Use Tankless Water Heater is a point-of-use electric tankless rated at 8 kW on 240 volts. Its listing gives a maximum flow of 1.9 GPM.

Flow depends on how cold the incoming water is. Our estimate from its input: 1.2 GPM at a 45°F rise, falling to 0.8 GPM at 70°F, which is less than one 2 GPM shower on a cold-climate winter day. Try your own inlet temperature.

At 240 volts 8 kW is about 33 amps (the listing states 33 A). The maker calls for 1 x 40 Amp DP breakers. A licensed electrician confirms the panel, the service and the wire before it goes in.

Small units like this suit one sink or a low-flow shower close by; at a kitchen sink's 1.5 GPM the water won't rise as far.

Also on the listing: features: Child Lock, LED Display, Overheat Protection; connections: 1/2" npt; material: Acrylonitrile Butadiene Styrene; model: WN08; warranty: 2 Year.

The listing gives dimensions of 9.7 in (W) x 14.1 in (H) and a weight of 9.2 lb.

Warranty, per the listing: 2 Year.

Right unit for this house?

Install it when

  • One sink or a low-flow shower
  • A far bathroom with a long wait for hot water

Look at another unit when

  • Whole-house hot water
  • Kitchen sinks at full flow in cold climates

Strengths and trade-offs

Strengths

  • 8 kW
  • Up to 1.9 GPM
  • No venting or gas line
  • Breakers stated by the maker

Trade-offs

  • Winter flow is much lower

Install limits

  • Figures are the maker's or seller's own. Flow at a rise is our estimate from the input; gas, venting and electrical work needs a licensed professional.

Rated performance

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Model numberWN08Retailer
Tank1.9 galRetailer
Dimensions (seller)9.7"W x 14.1"HRetailer
Features (seller)Child Lock, LED Display, Overheat ProtectionRetailer
Power8 MicrowattsRetailer
Voltage240 VRetailer
Max flow (maker)1.9 GPMRetailer
Product weight9.2 lbRetailer
Warranty2 YearRetailer
MaterialAcrylonitrile Butadiene StyreneRetailer
Amps (maker)33 ARetailer
Breakers (maker)1 x 40 Amp DP breakersRetailer
Connections1/2" nptRetailer

Rival units at this flow

More point-of-use water heaters rated for similar demand

Full point-of-use water heaters spec grid · Every WINTEMP unit in the catalog

Final verdict

A practical point-of-use electric tankless for one sink or a low-flow shower.

Buy this unit

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

How many amps does the WINTEMP WN08 8 kW Point-of-Use Tankless Water Heater draw?
About 33 amps at 240 volts (8 kW ÷ 240 V). The maker calls for 1 x 40 Amp DP breakers. Panel capacity, breakers and wire are confirmed by a licensed electrician from the manual.
How much hot water does the WINTEMP WN08 8 kW Point-of-Use Tankless Water Heater deliver in winter?
About 0.8 GPM at a 70°F rise and 1.2 GPM at a 45°F rise, estimated from its power and capped at its stated maximum.